Olympus rs-232c pc serial cable




















Instructions on using Olympus Camedia Digital Camera. NB: When this instruction sheet says, press the menu button n times, the count should begin from the first click on the menu button after turning the LCD display ON. Also, try not to use the LCD display when not connected to an external power source -- it runs down the batteries extremely quickly.

If you have any difficulty understanding this document, please let me know. The Olympus DL camera is stored in the department office. Take your pictures, and return the camera, then you can get your ID back. An extensive description of how to use the Camedia software. PDF help file from Olympus. To take a picture with the camera , simply open the lens barrier, place the subject in the viewfinder, and press the Shutter release button fully. If you need to use the flash , or the Macro mode for images from 4" to 20" from the camera , see the appropriate sections.

Make sure you don't shut the barrier before the image is totally saved a pencil icon appears on the LCD monitor while it is saving.

More advanced picture-taking information is found later in this document. Go to the computer in room labeled Elf 1. To the right of the computer, you will find two cables, a serial cable light colored , and a power cable black.

Connect these into the side of the camera. At this time, you should delete any pictures you don't want. Note: while the camera is plugged in, you should feel free to use the LCD screen, because you don't have to worry about conserving the battery.

Start the Olympus Camedia Master software. This can take several minutes, depending on how many pictures you download. Try not to store a lot of images on the PC. An extensive description of how to use the Camedia software. PDF help file from Olympus.

Borrowing the camera. Downloading the picture onto a computer. Deleting Unwanted Pictures. Images that may be useful when reading this document. To take a picture with the camera , simply open the lens barrier, place the subject in the viewfinder, and press the Shutter release button fully.

If you need to use the flash , or the Macro mode for images from 4" to 20" from the camera , see the appropriate sections.

Make sure you don't shut the barrier before the image is totally saved a pencil icon appears on the LCD monitor while it is saving. More advanced picture-taking information is found later in this document.

Go to the computer in room labeled Elf 1. To the right of the computer, you will find two cables, a serial cable light colored , and a power cable black. Connect these into the side of the camera.

At this time, you should delete any pictures you don't want. Note: while the camera is plugged in, you should feel free to use the LCD screen, because you don't have to worry about conserving the battery. Start the Olympus Camedia Master software. Click on Transfer Images :. You will probably want to create a new album to hold the pictures you are downloading from the camera:. This can take several minutes, depending on how many pictures you download.

Try not to store a lot of images on the PC. If the disk gets too full, your images may be deleted to save space. Either transfer them to the "engin" server, or to a memory stick, or to your own computer.

If you need more detailed information, refer to the Olympus Help Reference. Press the erase button to get a menu selection for "Yes" or "No". This is the button on top with the red icon that looks like a trash can. Press the Menu button on top of the camera -- it has a green icon that is a rectangle with three lines in it several times unitl you get to a screen that has a trash can icon on the left side.

Press the OK button again with "Yes" selected to perfrom All-frame erase. Cords with reversible mounting hardware have removable thumb screws to enable a wider range of mounting options than other cords. Mount them to ports and adapters, as well as directly into panels.

Transmit data between computers and other devices that have different USB sizes or styles. All USB adapters are backward compatible, so they work with cords and connectors that meet the same or a lower USB standard. Clear All. Computer Connection Type. Industry Designation. System of Measurement. End Type. Connection Type. End Shape. Shield Type. Cord OD. Cord Length. USB Connection Type.



0コメント

  • 1000 / 1000